Gear Wrench 8-Piece Reversible Ratcheting Combination Wrench Set (Standard or Metric)

The Patented Driveworks ratcheting box end needs as little as 5 Degrees of sweep to move a fastener; a standard 12-point box-end wrench needs 30 Degrees , or 6x as much room; box end is 15& Degrees offset for knuckle clearance
Long bolts and threaded rods are not a problem for the Driveworks; the ratcheting head allows the wrench to travel the length of the threads without removing the box end from the fastener
The thin head and shank allow the Driveworks into the tightest areas
The Surface Drive® box end configuration virtually eliminates the rounding of fasteners; by moving the contact points of the wrench back from the edge of the fastener, the area of flat contact is expanded, distributing the load over a wider area
Extremely strong, Driveworks ratcheting combination wrench meets or exceeds ANSI, DIN and federal torque specifications for standard professional combination wrenches
The Driveworks ratcheting combination wrench is a precision tool and is not intended to free frozen fasteners