Monolith 7x200 Watts Per Channel Multi-Channel Home Theater Power Amplifier

Model 14566
Number of Channels 7
EIA 1kHz Output Power at 8 Ohms* 250 watts
EIA 1kHz Output Power at 4 Ohms* 375 watts
FTC Full Bandwidth Output Power at 8 Ohms** 200 watts
FTC Full Bandwidth Output Power at 4 Ohms** 300 watts
Input Sensitivity for Full Rated Power 1.6 volts
Frequency Response at Rated Output 20Hz to 20kHz ±0.1dB
Phase Response +5 to -15 degrees from 20Hz to 20kHz at 1 watt
Signal-to-Noise Ratio "A-Weighted" Greater than 120dB below rated FTC Full Bandwidth Power
Total Harmonic Distortion (THD) Less than 0.03% at full rated FTC power
Less than 0.005% at full EIA power at 1kHz
Intermodulation Distortion (IMD) Less than 0.03% at full rated FTC power
Less than 0.005% at full EIA power at 1kHz
Toroidal Transformers 2 (1,230VA and 1,025VA)

Total Capacitance 156,800µF (22,400µF per channel)
Load Impedance Safe with all types of loads
Rated for 4 to 16 ohms
Power Bandwidth FTC +0, -3dB from 5Hz ~ 100kHz
Damping Factor Greater than 400 from 10Hz ~ 100kHz
Crosstalk Greater than 100dB from 20Hz ~ 20kHz
Gain Voltage gain of 28dB
Slew Rate > 50V / µS
Input Impedance 28 kilohms (nominal)
Remote Trigger Voltage 3.3 ~ 24.0 VDC at 5mA or greater
DC Output Offset Less than ±5mV
Input Power 120 VAC (nominal)
Chassis Dimensions 17.0" x 7.0" x 16.5" (432 x 178 x 419 mm)
Net Weight 93.2 lbs. (42.3kg)