Raindrip SDGCBHP Automatic Watering Kit with Timer for Ground Cover and Flower Beds

Get started with drip irrigation with a kit that contains all the essentials you need to water up to 200 sq. ft.; Use the kit to set up a drip irrigation system on its own, or to expand on an existing drip irrigation system
“Y” connector fits faucet/hose bibb; timer connects to “Y”; pressure regulator/filter connects to timer; connector on supply tubing attaches to pressure regulator; Clamp N Pierce with feeder lines and sprayers connect anywhere along supply tubing; Non-pressure compensating half-circle adjustable sprayers have a 13 GPH flow rate; Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to transport water to plants
Kit installs in three steps: 1) Connect the timer and supply tubing to the water source; 2) Lay out the tubing; and 3) Attach the preassembled water lines and place next to your plants; Kit includes instructions, guide, and contact information; Periodically check for leaks or damage; remove end closures and flush circuits until the water runs clear; in cold climates, winterize by completely draining the system to prevent lines from splitting; remove timer and batteries to prevent corrosion
Kit contains everything you need to get started, including preassembled parts; no tools required; Easy 3-step installation system; many parts screw in or snap together
Kit Includes: Timer; Pressure Regulator/Filter; “Y” Connector; 50 ft. of ½ in. Poly Tubing with ¾ in. FHT adapter; 10-2 ft. Clamp N Pierce ¼ in. feeder lines with 2 GPH drippers; Smart Loc Tee & Plug; 5-Steel Stakes; 10-Support Stakes; 5-Barbed Couplings