Craftsman Router and Router Table Combo

The Craftsman router and router table combo gives you what you need to get started on setting up a woodworking shop
Comes with router, 1/4" collet, wrench, table, fence, dust guard, two feather boards, miter gauge, three insert rings, hardware and a manual
The 9.5 amp router has a 1-3/4 HP motor that runs at 27,000 RPMs
The router is built with permanently lubricated and sealed ball bearings for longer motor life
There are 334 square inches of space on the 11/16 in. thick laminate-surfaced tabletop
Cutting depths can lock down in microfine adjustments
The fence adjusts for proper bit clearance, with the infeed and outfeed extending up to two inches
The jointing fence off sets up to 9/16 inch
Above-the-table cutting height adjustment works with most Craftsman routers except models 17540 add 17543
Table includes a double outlet power strip with a safety lock
The miter gauge adjusts up to 60 degrees in both directions
Three insert rings have opening diameters of 1-1/4", 1-1/2", and 1-3/4"
Dust extraction port